Advertisement

Multraship takes delivery of Carrousel Rave tug from Damen

Towage and salvage specialist Multraship has taken delivery of the first of two Carrousel Rave Tugs (CRT) which will make it easier, safer and more environmentally friendly to work with seagoing vessels at much higher speeds than conventional tugs can safely achieve, and without the risk of capsizing under a tow-load.

The vessel, commissioned as Multratug 32, was delivered by Netherlands shipyard Damen Maaskant in Stellendam and will operate under lease to Multraship. Multratug 32 is 32m long, has a maximum static bollard pull of 77 tonnes, and is powered by two Voith thruster units and two ABC main engines delivering 2,650kW at 1,000rpm. Top speed is over 14 knots.

The contract for the vessels was agreed between Novatug, an innovation arm of the group to which Multraship also belongs, and Damen’s specialist propulsion subsidiary Van der Velden Barkemeyer GmbH in November 2015. German shipyard Theodor Buschmann GmbH in Hamburg assembled the hulls, which were then moved to Stellendam for fitting-out.

Julian Oggel, managing director of Novatug, says, “The whole CRT concept was driven by safety considerations. In principle, capsizing is impossible when towing with the Carrousel, which facilitates the safe execution of manoeuvres that would be very high-risk with traditional tugs.

“The Carrousel system consists of a base structure surrounded by a steel ring that can rotate freely through 360° in the horizontal plane. It carries a towing winch that can tilt vertically 45 degrees so that the winch can always be aligned with the towing line, providing optimal control. As a result, we can work with large seagoing vessels at much greater speeds than can be achieved by conventional tugs, and that means that the vessels themselves are easier to steer. This a major step forward for both efficiency and safety.”

Pepijn Nuijten, managing director of Multraship Towage & Salvage, says, “We are delighted with the CRT, which not only represents a major improvement in crew safety but also means that we can continue to lead the way in the provision of services for our customers. Thanks to the ingenious design of the tug, which effectively maximises the use of the kinetic energy available in the towed vessel rather than the tug’s own engine power only, the same towing force can be achieved at much lower levels of fuel consumption than with a conventional tug.”

“The savings amount to at least 25 per cent on an average operation involving a seagoing vessel. We have been using sustainable Eco2Fuel+ diesel from De Pooter Oil since trials began, resulting in emissions of soot and particulate matter being reduced by a further 16.5 per cent, and a reduction in carbon emissions of 44.7 per cent compared with regular diesel.”

Mijndert Wiesenekker, sales director of Damen Benelux, says, “We are delighted to be handing over this remarkable new vessel to our long-standing partners at Multraship. We have been looking forward to this day for a long time and it gives us real pleasure to see Multratug 32 begin what we are sure will be a long and highly productive life.”

Damen is currently building a second, identical CRT for Novatug. Delivery is expected in May 2018 and the vessel has already been reserved for Multraship. Novatug also plans to market smaller versions of the CRT.

Ships Montly - January 2024

 Portuguese Navy’s Multi-Purpose Ship

Damen Shipyards Group held a joint steel cutting and keel laying ceremony at Damen Shipyards Galati in Romania. The event simultaneously marked two significant...
Advertisement

Related articles

 Portuguese Navy’s Multi-Purpose Ship

Damen Shipyards Group held a joint steel cutting and keel laying ceremony at Damen Shipyards Galati in Romania....

Commodore Clipper back in service

Following her overhaul and hull repaint at the Astander shipyard in Santander, Spain, Condor Ferries' ro-pax vessel Commodore...

NA Navy hydrographic ship HMNZS Manawanui sinks

The Royal New Zealand Navy’s hydrographic ship, HMNZS Manawanui, sank on 5 October 2024, after grounding on a...

Hull 096 reaches major milestone With Structural Completion

On 23 September 2024 a significant milestone was marked in the construction of Incat Hull 096, as the...