Advertisement

New Live Fish Carrier designed by Hansen

KNUD H. HANSEN has designed, project managed and supervised the construction for a Live Fish Carrier for Bakkafrost in the Faroe Islands.

This innovative vessel is one of the biggest Live Fish Carriers in the world at 109.2m in length and 22.2min breadth and with a cargo capacity of 7,000 cubic metres.

The vessel is in many ways an innovation, specifically related to the arrangement of the special LFC-equipment onboard.

With four cargo holds of 1750 cubic meters each the vessel can transport about 1000 tons of live salmon from cages offshore to shore-based processing facilities.

The vessel can also take live salmon onboard for treatment for lice in fresh water in the cargo tanks and when discharging to cages, salmon over a certain size can be retained onboard for transport to the processing facility.

Capacity for production of fresh water through reverse osmosis is 6000 tons per day.

All equipment onboard, inclusive main propulsion motor, are electrically driven. Power is supplied by a hybrid system of diesel generators, electric batteries and whilst in harbour a high voltage shore connection is also available, which in a practical combination can reduce the fuel consumption.

The five diesel generators are placed in a deckhouse on shelter deck for easy change to suitable 100% green generators when such technology becomes available.

On top of the machinery deck house there is place for sixteen 20-foot containers which gives space for future green fuel.

With a dynamic positioning system including 2 x 2 side thrusters of 1000 kW each and far-reaching deck cranes the ship is made ready for operating towards future cages on open sea.

PRINCIPAL PARTICULARS
Length Overall       109.2m
Breadth, moulded     22.2m
Depth to main deck 8.2m
Capasity live fish    about 1,000 t
FW tank capacity   3,000m3
FW production       6,000m3 / 24 hrs
Speed                   13,5 knots

Ships Montly - January 2024

Outfitting of the Nexans Electra CLV begins at Ulstein Verft

The hull of the state-of-the-art DP3 cable-laying vessel Nexans Electra arrived at Ulstein Verft on 5 July 2025. This marks the commencement of the...
Advertisement

Related articles

Outfitting of the Nexans Electra CLV begins at Ulstein Verft

The hull of the state-of-the-art DP3 cable-laying vessel Nexans Electra arrived at Ulstein Verft on 5 July 2025....

Historic cruise ship Astoria goes for scrapping

The world's oldest cruise vessel Astoria finally reaches the end of the line. After 77 years of service,...

Glen Rosa on target for 2026

In a letter to the Scottish Parliament’s Net Zero, Energy & Transport Committee, Ferguson Marine CEO Graeme Thomson...

Research vessel Oscar Dyson to be upgraded

The National Oceanic and Atmospheric Administration (NOAA) has awarded a $95.4 million contract to JAG Alaska Inc., based...